Printer hardware me aane wali sabse irritating mechanical fault hoti hai 'Continuous Paper Jam'. Aap zaroori meeting ke liye print nikal rahe hote hain aur achanak printer ek ajeeb mechanical grind aawaz karta hai, display par 'Paper Jam / Clear Feed Path' ki red light blink karne lagti hai, aur adha paper printer ke fuser unit ya roller ke andar crumple (fold) hokar phas jata hai.
Isse bhi buri baat ye hoti hai ki gusse ya jaldbazi me log phanse huye paper ko zor se khinchte hain, jisse paper andar phat jata hai, chote tukde sensors me phans jaate hain, ya fuser teflon sleeve permanently phat jati hai.
Is practical guide me hum phanse huye paper ko safely nikalne ka standard method aur baar-baar paper jam hone ke permanent mechanical solutions explain kar rahe hain.
1. Golden Rule: Phanse Huye Paper Ko Safely Kaise Nikalein?
Step-by-step safe extraction process:
- Power OFF First: Printer ka main power switch turant band karein. Laser printer ka fuser roller 200°C garam hota hai, jisse ungli jal sakti hai.
- Open Access Doors: Printer ka front toner access door aur rear paper path door dono open karein.
- Remove Toner/Cartridge: Laser printer me cartridge ko gently bahar nikalein taaki internal paper track fully visible ho jaye.
- Two-Hand Slow Pull: Phanse huye paper ko hamesha **dono haathon se paper ke dono kinaro ko pakad kar paper ke natural movement direction me dheere-dheere kheenchein**.
- Never Pull Backwards: Paper ko koshish karein ki aage ki taraf nikalein, ulta piche ki taraf zor se na kheenchein, kyunki reverse force se pick-up gears toot sakte hain.
- Inspect for Tiny Torn Pieces: Agar paper phat gaya hai to torch se andar check karein ki koi chota paper piece to andar nahi reh gaya.
2. Baar-Baar Paper Jam Hone Ke 5 Mukhya Kaaran
- Reason 1: Worn Out Rubber Pick-up Rollers (Ghis Gaye Rollers):
- Solution: Pick-up roller ko Isopropyl alcohol se saaf karein ya worn out hone par naya rubber roller replace karwayein.
Printer tray se paper ko andar kheenchne ke liye chote rubber rollers lage hote hain. 1-2 saal use ke baad rubber smooth aur slippery ho jati hai ya uspe paper dust jam jati hai. Roller paper par grip nahi bana pata aur paper beech me ruk jata hai.
- Reason 2: Damp / Moist Paper (Nami Wala Paper):
- Solution: Paper ko hamesha sealed packet me dry jagah rakhein. Tray me daalne se pehle sheets ko dono haathon se 'fan' (hilaayein) taaki sheets alag-alag ho sakein.
Barsaat ke mausam me ya moisture wali jagah par rakha A4 paper hawa ki nami absorb kar leta hai. Nami wale paper aapas me static electricity se chipak jaate hain, aur roller ek sath 2-3 sheets andar kheench leta hai jisse instant jam ho jata hai.
- Reason 3: Wrong Paper GSM:
Normal office printing ke liye standard 70 GSM ya 75 GSM paper use karein. Bohot patla (55-60 GSM local paper) fuser heat me curl hokar jam ho jata hai.
- Reason 4: Foreign Objects in Paper Tray:
Office me paper clips, all-pins, stapler pins ya rubber bands paper tray me gir jate hain jo paper ke saath roller ke andar ghus kar gears ko jam kar dete hain.
- Reason 5: Torn Fuser Film Sleeve / Pressure Roller Damage:
Laser printer me paper bahar nikalte waqt 'Accordion' (pankhe ki tarah fold) hokar phas raha hai, to fuser film phat chuki hai aur use service center par replace karwana padega.
Rajbala IT — Complete Printer Mechanical Repairs
Rajbala IT Kashipur me printer pick-up roller replacement, fuser unit overhaul, sensor calibration aur paper feed trajectory restoration provide karta hai.
Agar aapka printer lagataar paper jam kar raha hai, to hamari laboratory me expert mechanical inspection schedule karein.